Masayuki Morimoto was born in Tokyo, Japan.
He received the B.S., M.S., and Ph.D. degrees all in electrical engineering from Keio University,
Yokohama, Japan in 1975, 1977 and 1990, respectively.
From 1977 to 2005, He was with Mitsubishi Heavy Industries, Ltd.,
where he has been involved in research and development of power electronics and electric machinery.
From 1994 to 2004, he was also a Lecturer of the Department of Electrical and Computer Engineering at Nagoya Institute of Technology.
From 2005 to 2018, he was a professor of the Department of Electrical and Electronic Engineering at Tokai University.
From 2018, He is the president of MorimotoR Lab.
Dr. Morimoto is a Fellow of the Institute of Electrical Engineers of Japan (IEEJ),
and Life Member of the Institute of electrical and Electronic Engineer(IEEE).
Publications in Engish after 2010
"Field-Weakening Control for Torque and Efficiency Optimization of a Four-Switch Three-Phase Inverter-Fed Induction Motor Driveh
IEEJ Journal of Industry Applications, vol.8, No.3, pp548-555 (2019)
gEfficiency of Contactless Power Transmission in a Long Distanceh
Proc. of ICEMS 2018, III6-0371 (2018).
gEffect of Seawater for Contactless Power Transmissionh
Proc. of ICEMS 2018, III6-0378 (2018).
A Field Weakening Control Strategy for Four Switch Three Phase Inverter Fed Three Phase Induction Motor Drive h
Proc. of ICEMS 2018, II1-0381 (2018).
gEvaluation of Transformation Matrix for Instantaneous Vector Control of Four Switch Three Phase Inverter Fed Induction Motor Driveh
Proc. of ICEMS 2018, II1- 0498 (2018).
gContactless Power Transmission in Seawaterh
Invited speech, ICPRE 2018(2018).
"Improved Torque and Efficiency of a Four Switch Three Phase Inverter Fed Induction Motor Drive"
IEEE PEDS 2017, pp919-924(2017)
"Instantaneous Vector Control of Four Switch Three Phase Inverter Fed Induction Motor Drive"
IEEJ Journal of Industry Applications, vol.6, No.6, pp429-434(2017)
"Development of a Load Torque Measurement System for Two Phase Inverter Fed Induction Motor drive with Vector Control Method"
Proceedings of the School of Engineering of Tokai University, series E, No.42, pp9-14(2017)
"Electric vehicle, yesterday and tommorow",
Invited speech, IEEE ICPRE 2017,Chengdu(China).
"Flux Weakening Control for Torque and Efficiency Optimization of a Vector
Controlled Four Switch Three Phase Inverter Fed Induction Motor drive"
IEEE ICPRE 2017,PE071(2017)
"Loss Analysis of Contactless Power Transmission in Seawater"
IEEE ICPRE 2017,PE049(2017)
"CONTACTLESS POWER TRANSFER IN SEAWATER"
EPE'17 ECCE EuropeA0082(2017)
"Evaluation of Motor Efficiency of a Vector Controlled 2 Phase Inverter Fed 3 Phase Induction Motor Drive"
2017 IEE-Japan Industry Application Society ConferenceA3-81(2017).
"Effects of Q Factor on Wireless Power Transmission by Magnetic Resonant
Proc. of 2016 IEEE ICPRE, rp032, PRE038(2016).
"Instantaneous Vector Control of Four Switch Three Phase Inverter fed Induction Motor Drive"
Proc. of ICEMS 2016, LS2B1(2016).
"Field Oriented Control of 3 Phase Induction Motor drive by 2 Phase Inverter"
Proc. of ICEMS 2015, 26P3-7(2015).
"High Current Inductor for DC-DC Converter"
Proc. of ICEMS 2015, 28E2-3(2015).
"Which is the First Electric Vehicle?"
Electrical Engineering in Japan, Vol. 192, No. 2,p31-38(2015)
"SOH estimation of lead acid battery by artificial deterioration"
Proc. of ICEMS2014, DS2H4-15(2014).
"Induction Motor Made of SMC"
21F3-1, IPEC-Hiroshima 2014(2014).
"Online SOC Estimation of Battery for Wireless Tramcar"
Electrical Engineering in Japan, Vol. 186, No. 2,p83-89(2014)
"Variation of Iron Loss by Manufacturing method of SMC Motor Core"
IMD-0460, ICEMS 2013(2013)
"SOH Estimation of Lead Acid Battery by the Variation of
Equivalent Circuit Parameters by the Deterioration"
OT-0746, ICEMS 2013(2013).
"Magnetic Design of Inductor for DC-DC Converter"
PCI-0457, ICEMS 2013(2013).
"Performance improvement of Induction Motor by press molded SMC Coreh
EPE'13 ECCE EuropeA0096(2013)
"Vector Control Three Phase Motor by Two Phase Inverter
(Kuala Lumpur, Malaysia)
"Performance Improvement of an Induction Motor by 3D Shaped Molded SMC
(Kuala Lumpur, Malaysia)
"Vector Control of Two Phase Inverter for Driving Three Phase Motor
ICEMS 2012, LS2A-4(2012).
"Performance improvement of an Induction Motor by Soft Magnetic Composite(SMC)
ICEMS 2012, DS1G3-5(2012).
"Efficiency Improvement of Induction Motor by 3-D Core Made of SMC
EPE-PEMC 2012 ECCE Europe, LS1b.3, (2012).
(Novi Sad, Serbia)
"Rare earth Free, Traction Motor for Electric Vehicle
IEVC 2012 (International Conference on Electric Vehicle)
"Performance Improvement of Induction Motor made of Three Dimensional Shaped SMC Core
Proc. of PEDS 2011, 192(2011).
"SOH Estimation of Lead Acid Battery for Automobile"
Proc. of PEDS 2011, 326(2011).
"Design Consideration of Non-contact Feeding System"
Proc. of ICEMS 2010, FAOD-06(2010).
"Iron Loss Characteristics of Induction Motor Made of Soft Magnetic Composite "(SMC)
Proc. of ICEMS 2010, ISM-11(2010).
"Emergency Drive Method for EV at the Inverter Fault"(SMC)
Proc. of ICEMS 2010, NGV-03(2010).
"Iron loss of non rare earth traction motor for EVs"
"Induction Motor made of Iron powder Core"
Proc. of IPEC-Sapporo 2010, p1814(2010).
"Study of Iron Loss in Induction Motor made with Soft Magnetic Composite
Core based on Finite Element Analysis"
Proc. of IPEC-Sapporo 2010, p270(2010).
"High Frequency Leakage Current to the Building Structure
from PWM Inverter-Motor system"
Proc. of PCIM Europe 2010, PP74(2010)